2000 Mercedes-Benz E vs. 1960 Peugeot 203

To start off, 2000 Mercedes-Benz E is newer by 40 year(s). Which means there will be less support and parts availability for 1960 Peugeot 203. In addition, the cost of maintenance, including insurance, on 1960 Peugeot 203 would be higher. At 1,998 cc (4 cylinders), 2000 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2000 Mercedes-Benz E (160 HP @ 5300 RPM) has 116 more horse power than 1960 Peugeot 203. (44 HP @ 4600 RPM). In normal driving conditions, 2000 Mercedes-Benz E should accelerate faster than 1960 Peugeot 203. With that said, vehicle weight also plays an important factor in acceleration. 2000 Mercedes-Benz E weights approximately 620 kg more than 1960 Peugeot 203. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Mercedes-Benz E (230 Nm @ 2500 RPM) has 153 more torque (in Nm) than 1960 Peugeot 203. (77 Nm @ 2500 RPM). This means 2000 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1960 Peugeot 203. 2000 Mercedes-Benz E has automatic transmission and 1960 Peugeot 203 has manual transmission. 1960 Peugeot 203 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Mercedes-Benz E will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Mercedes-Benz E 1960 Peugeot 203
Make Mercedes-Benz Peugeot
Model E 203
Year Released 2000 1960
Body Type Sedan Convertible
Engine Position Front Front
Engine Size 1998 cc 1286 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 160 HP 44 HP
Engine RPM 5300 RPM 4600 RPM
Torque 230 Nm 77 Nm
Torque RPM 2500 RPM 2500 RPM
Engine Bore Size 90 mm 75 mm
Engine Stroke Size 78.7 mm 73 mm
Engine Compression Ratio 9.5:1 9.4:1
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1600 kg 980 kg
Vehicle Length 4820 mm 4360 mm
Vehicle Width 1810 mm 1620 mm
Vehicle Height 1450 mm 1470 mm
Wheelbase Size 2720 mm 2580 mm
Fuel Tank Capacity 70 L 50 L