2000 Rolls-Royce Park Ward vs. 2010 Mazda BT-50

To start off, 2010 Mazda BT-50 is newer by 10 year(s). Which means there will be less support and parts availability for 2000 Rolls-Royce Park Ward. In addition, the cost of maintenance, including insurance, on 2000 Rolls-Royce Park Ward would be higher. At 5,379 cc (12 cylinders), 2000 Rolls-Royce Park Ward is equipped with a bigger engine. In terms of performance, 2000 Rolls-Royce Park Ward (322 HP @ 5000 RPM) has 199 more horse power than 2010 Mazda BT-50. (123 HP @ 4600 RPM). In normal driving conditions, 2000 Rolls-Royce Park Ward should accelerate faster than 2010 Mazda BT-50. With that said, vehicle weight also plays an important factor in acceleration. 2000 Rolls-Royce Park Ward weights approximately 900 kg more than 2010 Mazda BT-50. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Mazda BT-50 is four wheel drive (4WD), it will have significant more traction and grip than 2000 Rolls-Royce Park Ward. In wet, icy, snow, or gravel driving conditions, 2010 Mazda BT-50 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Rolls-Royce Park Ward (499 Nm @ 3900 RPM) has 293 more torque (in Nm) than 2010 Mazda BT-50. (206 Nm @ 3500 RPM). This means 2000 Rolls-Royce Park Ward will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda BT-50. 2000 Rolls-Royce Park Ward has automatic transmission and 2010 Mazda BT-50 has manual transmission. 2010 Mazda BT-50 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Rolls-Royce Park Ward will be easier to drive especially in heavy traffic.

Compare all specifications:

2000 Rolls-Royce Park Ward 2010 Mazda BT-50
Make Rolls-Royce Mazda
Model Park Ward BT-50
Year Released 2000 2010
Body Type Sedan Pickup
Engine Position Front Front
Engine Size 5379 cc 2606 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 322 HP 123 HP
Engine RPM 5000 RPM 4600 RPM
Torque 499 Nm 206 Nm
Torque RPM 3900 RPM 3500 RPM
Engine Compression Ratio 10.0:1 8.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Automatic Manual
Number of Seats 4 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 2450 kg 1550 kg
Vehicle Height 1520 mm 1810 mm
Wheelbase Size 3360 mm 3010 mm
Fuel Tank Capacity 100 L 50 L