2001 Ford Crown Victoria vs. 2010 Mazda 2
To start off, 2010 Mazda 2 is newer by 9 year(s). Which means there will be less support and parts availability for 2001 Ford Crown Victoria. In addition, the cost of maintenance, including insurance, on 2001 Ford Crown Victoria would be higher. At 4,601 cc (8 cylinders), 2001 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2001 Ford Crown Victoria (235 HP @ 4750 RPM) has 161 more horse power than 2010 Mazda 2. (74 HP @ 5200 RPM). In normal driving conditions, 2001 Ford Crown Victoria should accelerate faster than 2010 Mazda 2. With that said, vehicle weight also plays an important factor in acceleration. 2001 Ford Crown Victoria weights approximately 656 kg more than 2010 Mazda 2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2001 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2001 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 2, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2001 Ford Crown Victoria (367 Nm @ 4000 RPM) has 257 more torque (in Nm) than 2010 Mazda 2. (110 Nm @ 4000 RPM). This means 2001 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda 2. 2001 Ford Crown Victoria has automatic transmission and 2010 Mazda 2 has manual transmission. 2010 Mazda 2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2001 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2001 Ford Crown Victoria | 2010 Mazda 2 | |
| Make | Ford | Mazda |
| Model | Crown Victoria | 2 |
| Year Released | 2001 | 2010 |
| Body Type | Sedan | Hatchback |
| Engine Position | Front | Front |
| Engine Size | 4601 cc | 1242 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 235 HP | 74 HP |
| Engine RPM | 4750 RPM | 5200 RPM |
| Torque | 367 Nm | 110 Nm |
| Torque RPM | 4000 RPM | 4000 RPM |
| Engine Bore Size | 90.3 mm | 72 mm |
| Engine Stroke Size | 90 mm | 76.5 mm |
| Engine Compression Ratio | 9.4:1 | 10.0:1 |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1781 kg | 1125 kg |
| Vehicle Length | 5390 mm | 3930 mm |
| Vehicle Width | 1990 mm | 1690 mm |
| Vehicle Height | 1450 mm | 1550 mm |
| Wheelbase Size | 2920 mm | 2500 mm |
| Fuel Tank Capacity | 72 L | 45 L |
