2002 Aston Martin DB7 vs. 2010 Chrysler Sebring

To start off, 2010 Chrysler Sebring is newer by 8 year(s). Which means there will be less support and parts availability for 2002 Aston Martin DB7. In addition, the cost of maintenance, including insurance, on 2002 Aston Martin DB7 would be higher. At 5,932 cc (12 cylinders), 2002 Aston Martin DB7 is equipped with a bigger engine. In terms of performance, 2002 Aston Martin DB7 (450 HP @ 6000 RPM) has 282 more horse power than 2010 Chrysler Sebring. (168 HP @ 6000 RPM). In normal driving conditions, 2002 Aston Martin DB7 should accelerate faster than 2010 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 110 kg more than 2002 Aston Martin DB7.

Because 2002 Aston Martin DB7 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2002 Aston Martin DB7. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Aston Martin DB7 (577 Nm @ 5000 RPM) has 357 more torque (in Nm) than 2010 Chrysler Sebring. (220 Nm @ 4400 RPM). This means 2002 Aston Martin DB7 will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 2002 Aston Martin DB7 has manual transmission. 2002 Aston Martin DB7 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2002 Aston Martin DB7 2010 Chrysler Sebring
Make Aston Martin Chrysler
Model DB7 Sebring
Year Released 2002 2010
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 5932 cc 2360 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 450 HP 168 HP
Engine RPM 6000 RPM 6000 RPM
Torque 577 Nm 220 Nm
Torque RPM 5000 RPM 4400 RPM
Engine Compression Ratio 10.3:1 10.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1800 kg 1910 kg
Vehicle Length 4700 mm 4860 mm
Vehicle Width 1840 mm 1850 mm
Vehicle Height 1250 mm 1500 mm
Wheelbase Size 2600 mm 2770 mm
Fuel Tank Capacity 89 L 64 L