2002 Aston Martin DB7 vs. 2012 Ford Fusion
To start off, 2012 Ford Fusion is newer by 10 year(s). Which means there will be less support and parts availability for 2002 Aston Martin DB7. In addition, the cost of maintenance, including insurance, on 2002 Aston Martin DB7 would be higher. At 5,932 cc (12 cylinders), 2002 Aston Martin DB7 is equipped with a bigger engine. In terms of performance, 2002 Aston Martin DB7 (450 HP @ 6000 RPM) has 275 more horse power than 2012 Ford Fusion. (175 HP @ 6000 RPM). In normal driving conditions, 2002 Aston Martin DB7 should accelerate faster than 2012 Ford Fusion. With that said, vehicle weight also plays an important factor in acceleration. 2002 Aston Martin DB7 weights approximately 284 kg more than 2012 Ford Fusion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2002 Aston Martin DB7 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2002 Aston Martin DB7. However, in wet, icy, snow, or gravel driving conditions, 2012 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Aston Martin DB7 (577 Nm @ 5000 RPM) has 344 more torque (in Nm) than 2012 Ford Fusion. (233 Nm @ 4500 RPM). This means 2002 Aston Martin DB7 will have an easier job in driving up hills or pulling heavy equipment than 2012 Ford Fusion. 2012 Ford Fusion has automatic transmission and 2002 Aston Martin DB7 has manual transmission. 2002 Aston Martin DB7 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Fusion will be easier to drive especially in heavy traffic.
Compare all specifications:
2002 Aston Martin DB7 | 2012 Ford Fusion | |
Make | Aston Martin | Ford |
Model | DB7 | Fusion |
Year Released | 2002 | 2012 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 5932 cc | 2500 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 450 HP | 175 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 577 Nm | 233 Nm |
Torque RPM | 5000 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1800 kg | 1516 kg |
Vehicle Length | 4700 mm | 4841 mm |
Vehicle Width | 1840 mm | 1834 mm |
Vehicle Height | 1250 mm | 1445 mm |
Wheelbase Size | 2600 mm | 2728 mm |
Fuel Tank Capacity | 89 L | 66 L |