2002 Beijing BJ 2020 vs. 1970 Mazda RX-2

To start off, 2002 Beijing BJ 2020 is newer by 32 year(s). Which means there will be less support and parts availability for 1970 Mazda RX-2. In addition, the cost of maintenance, including insurance, on 1970 Mazda RX-2 would be higher. At 2,445 cc (4 cylinders), 2002 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 1970 Mazda RX-2 (118 HP @ 6500 RPM) has 32 more horse power than 2002 Beijing BJ 2020. (86 HP @ 3800 RPM) In normal driving conditions, 1970 Mazda RX-2 should accelerate faster than 2002 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 2002 Beijing BJ 2020 weights approximately 620 kg more than 1970 Mazda RX-2.

Because 2002 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1970 Mazda RX-2. In wet, icy, snow, or gravel driving conditions, 2002 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Beijing BJ 2020 (173 Nm @ 3000 RPM) has 16 more torque (in Nm) than 1970 Mazda RX-2. (157 Nm @ 3500 RPM). This means 2002 Beijing BJ 2020 will have an easier job in driving up hills or pulling heavy equipment than 1970 Mazda RX-2.

Compare all specifications:

2002 Beijing BJ 2020 1970 Mazda RX-2
Make Beijing Mazda
Model BJ 2020 RX-2
Year Released 2002 1970
Engine Size 2445 cc 2292 cc
Engine Type in-line dual-disk rotary
Horse Power 86 HP 118 HP
Engine RPM 3800 RPM 6500 RPM
Torque 173 Nm 157 Nm
Torque RPM 3000 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1580 kg 960 kg
Vehicle Length 4020 mm 4150 mm
Vehicle Width 1780 mm 1580 mm
Vehicle Height 1950 mm 1420 mm
Wheelbase Size 2310 mm 2480 mm