2002 Beijing BJ 2020 vs. 1992 Mazda RX-7
To start off, 2002 Beijing BJ 2020 is newer by 10 year(s). Which means there will be less support and parts availability for 1992 Mazda RX-7. In addition, the cost of maintenance, including insurance, on 1992 Mazda RX-7 would be higher. At 2,615 cc, 1992 Mazda RX-7 is equipped with a bigger engine. In terms of performance, 1992 Mazda RX-7 (197 HP @ 6500 RPM) has 111 more horse power than 2002 Beijing BJ 2020. (86 HP @ 3800 RPM) In normal driving conditions, 1992 Mazda RX-7 should accelerate faster than 2002 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 2002 Beijing BJ 2020 weights approximately 280 kg more than 1992 Mazda RX-7.
Because 2002 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1992 Mazda RX-7. In wet, icy, snow, or gravel driving conditions, 2002 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Mazda RX-7 (270 Nm @ 3500 RPM) has 97 more torque (in Nm) than 2002 Beijing BJ 2020. (173 Nm @ 3000 RPM). This means 1992 Mazda RX-7 will have an easier job in driving up hills or pulling heavy equipment than 2002 Beijing BJ 2020.
Compare all specifications:
2002 Beijing BJ 2020 | 1992 Mazda RX-7 | |
Make | Beijing | Mazda |
Model | BJ 2020 | RX-7 |
Year Released | 2002 | 1992 |
Engine Size | 2445 cc | 2615 cc |
Engine Type | in-line | dual-disk rotary |
Horse Power | 86 HP | 197 HP |
Engine RPM | 3800 RPM | 6500 RPM |
Torque | 173 Nm | 270 Nm |
Torque RPM | 3000 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1580 kg | 1300 kg |
Vehicle Length | 4020 mm | 4320 mm |
Vehicle Width | 1780 mm | 1700 mm |
Vehicle Height | 1950 mm | 1270 mm |
Wheelbase Size | 2310 mm | 2430 mm |