2002 Chrysler Concorde vs. 1955 Sunbeam Alpine
To start off, 2002 Chrysler Concorde is newer by 47 year(s). Which means there will be less support and parts availability for 1955 Sunbeam Alpine. In addition, the cost of maintenance, including insurance, on 1955 Sunbeam Alpine would be higher. At 2,737 cc (6 cylinders), 2002 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 2002 Chrysler Concorde (190 HP @ 5750 RPM) has 110 more horse power than 1955 Sunbeam Alpine. (80 HP @ 4200 RPM). In normal driving conditions, 2002 Chrysler Concorde should accelerate faster than 1955 Sunbeam Alpine. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler Concorde weights approximately 321 kg more than 1955 Sunbeam Alpine. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Sunbeam Alpine is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Sunbeam Alpine. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler Concorde (258 Nm @ 4850 RPM) has 95 more torque (in Nm) than 1955 Sunbeam Alpine. (163 Nm @ 2400 RPM). This means 2002 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1955 Sunbeam Alpine. 2002 Chrysler Concorde has automatic transmission and 1955 Sunbeam Alpine has manual transmission. 1955 Sunbeam Alpine will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2002 Chrysler Concorde | 1955 Sunbeam Alpine | |
| Make | Chrysler | Sunbeam |
| Model | Concorde | Alpine |
| Year Released | 2002 | 1955 |
| Engine Position | Front | Front |
| Engine Size | 2737 cc | 2267 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 190 HP | 80 HP |
| Engine RPM | 5750 RPM | 4200 RPM |
| Torque | 258 Nm | 163 Nm |
| Torque RPM | 4850 RPM | 2400 RPM |
| Engine Compression Ratio | 10.0:1 | 7.4:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1621 kg | 1300 kg |
| Vehicle Length | 5280 mm | 4280 mm |
| Vehicle Width | 1900 mm | 1590 mm |
| Vehicle Height | 1420 mm | 1480 mm |
| Wheelbase Size | 2620 mm | 2480 mm |
| Fuel Tank Capacity | 68 L | 45 L |
