2002 Chrysler Sebring vs. 2006 Toyota MR2
To start off, 2006 Toyota MR2 is newer by 4 year(s). Which means there will be less support and parts availability for 2002 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2002 Chrysler Sebring would be higher. At 2,343 cc (4 cylinders), 2002 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2002 Chrysler Sebring (149 HP @ 5200 RPM) has 11 more horse power than 2006 Toyota MR2. (138 HP @ 6400 RPM). In normal driving conditions, 2002 Chrysler Sebring should accelerate faster than 2006 Toyota MR2. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler Sebring weights approximately 387 kg more than 2006 Toyota MR2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Toyota MR2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Toyota MR2. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler Sebring (226 Nm @ 4000 RPM) has 56 more torque (in Nm) than 2006 Toyota MR2. (170 Nm @ 4400 RPM). This means 2002 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 2006 Toyota MR2. 2002 Chrysler Sebring has automatic transmission and 2006 Toyota MR2 has manual transmission. 2006 Toyota MR2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2002 Chrysler Sebring | 2006 Toyota MR2 | |
Make | Chrysler | Toyota |
Model | Sebring | MR2 |
Year Released | 2002 | 2006 |
Body Type | Sedan | Convertible |
Engine Position | Front | Middle |
Engine Size | 2343 cc | 1792 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 149 HP | 138 HP |
Engine RPM | 5200 RPM | 6400 RPM |
Torque | 226 Nm | 170 Nm |
Torque RPM | 4000 RPM | 4400 RPM |
Engine Bore Size | 87.4 mm | 79 mm |
Engine Stroke Size | 101 mm | 91.5 mm |
Engine Compression Ratio | 9.4:1 | 10.0:1 |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1452 kg | 1065 kg |
Vehicle Length | 4850 mm | 3900 mm |
Vehicle Width | 1800 mm | 1700 mm |
Vehicle Height | 1400 mm | 1250 mm |
Wheelbase Size | 2880 mm | 2460 mm |
Fuel Tank Capacity | 61 L | 48 L |