2002 Chrysler Sebring vs. 2010 Audi S3

To start off, 2010 Audi S3 is newer by 8 year(s). Which means there will be less support and parts availability for 2002 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2002 Chrysler Sebring would be higher. At 2,343 cc (4 cylinders), 2002 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Audi S3 (252 HP @ 6000 RPM) has 103 more horse power than 2002 Chrysler Sebring. (149 HP @ 5200 RPM) In normal driving conditions, 2010 Audi S3 should accelerate faster than 2002 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Audi S3 weights approximately 3 kg more than 2002 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Audi S3 is four wheel drive (4WD), it will have significant more traction and grip than 2002 Chrysler Sebring. In wet, icy, snow, or gravel driving conditions, 2010 Audi S3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Audi S3 (331 Nm @ 2400 RPM) has 105 more torque (in Nm) than 2002 Chrysler Sebring. (226 Nm @ 4000 RPM). This means 2010 Audi S3 will have an easier job in driving up hills or pulling heavy equipment than 2002 Chrysler Sebring. 2002 Chrysler Sebring has automatic transmission and 2010 Audi S3 has manual transmission. 2010 Audi S3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2002 Chrysler Sebring 2010 Audi S3
Make Chrysler Audi
Model Sebring S3
Year Released 2002 2010
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 2343 cc 1984 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 149 HP 252 HP
Engine RPM 5200 RPM 6000 RPM
Torque 226 Nm 331 Nm
Torque RPM 4000 RPM 2400 RPM
Engine Bore Size 87.4 mm 82.5 mm
Engine Stroke Size 101 mm 92.8 mm
Drive Type Front 4WD
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1452 kg 1455 kg
Vehicle Length 4850 mm 4220 mm
Vehicle Width 1800 mm 1410 mm
Vehicle Height 1400 mm 1770 mm
Wheelbase Size 2880 mm 2580 mm
Fuel Tank Capacity 61 L 60 L