2002 Chrysler Sebring vs. 2010 BMW 325
To start off, 2010 BMW 325 is newer by 8 year(s). Which means there will be less support and parts availability for 2002 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2002 Chrysler Sebring would be higher. At 2,736 cc (6 cylinders), 2002 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2002 Chrysler Sebring (200 HP @ 5800 RPM) has 6 more horse power than 2010 BMW 325. (194 HP @ 4000 RPM). In normal driving conditions, 2002 Chrysler Sebring should accelerate faster than 2010 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler Sebring weights approximately 20 kg more than 2010 BMW 325. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 325 (400 Nm @ 3250 RPM) has 142 more torque (in Nm) than 2002 Chrysler Sebring. (258 Nm @ 4300 RPM). This means 2010 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2002 Chrysler Sebring. 2002 Chrysler Sebring has automatic transmission and 2010 BMW 325 has manual transmission. 2010 BMW 325 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2002 Chrysler Sebring | 2010 BMW 325 | |
Make | Chrysler | BMW |
Model | Sebring | 325 |
Year Released | 2002 | 2010 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 2736 cc | 2494 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 200 HP | 194 HP |
Engine RPM | 5800 RPM | 4000 RPM |
Torque | 258 Nm | 400 Nm |
Torque RPM | 4300 RPM | 3250 RPM |
Engine Compression Ratio | 9.7:1 | 17.0:1 |
Fuel Type | Gasoline | Diesel |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1610 kg | 1590 kg |
Vehicle Length | 4850 mm | 4540 mm |
Vehicle Width | 1800 mm | 1820 mm |
Vehicle Height | 1400 mm | 1430 mm |
Wheelbase Size | 2620 mm | 2770 mm |
Fuel Consumption Overall | 10.7 L/100km | 6.3 L/100km |
Fuel Tank Capacity | 61 L | 61 L |