2002 Chrysler Sebring vs. 2013 Porsche Cayenne

To start off, 2013 Porsche Cayenne is newer by 11 year(s). Which means there will be less support and parts availability for 2002 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2002 Chrysler Sebring would be higher. At 4,800 cc (8 cylinders), 2013 Porsche Cayenne is equipped with a bigger engine. In terms of performance, 2013 Porsche Cayenne (493 HP @ 6000 RPM) has 344 more horse power than 2002 Chrysler Sebring. (149 HP @ 5200 RPM) In normal driving conditions, 2013 Porsche Cayenne should accelerate faster than 2002 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2013 Porsche Cayenne weights approximately 793 kg more than 2002 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 Porsche Cayenne is all wheel drive (AWD), it will have significant more traction and grip than 2002 Chrysler Sebring. In wet, icy, snow, or gravel driving conditions, 2013 Porsche Cayenne will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Porsche Cayenne (700 Nm @ 4500 RPM) has 474 more torque (in Nm) than 2002 Chrysler Sebring. (226 Nm @ 4000 RPM). This means 2013 Porsche Cayenne will have an easier job in driving up hills or pulling heavy equipment than 2002 Chrysler Sebring. 2002 Chrysler Sebring has automatic transmission and 2013 Porsche Cayenne has manual transmission. 2013 Porsche Cayenne will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2002 Chrysler Sebring 2013 Porsche Cayenne
Make Chrysler Porsche
Model Sebring Cayenne
Year Released 2002 2013
Body Type Sedan SUV
Engine Position Front Rear
Engine Size 2343 cc 4800 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line boxer
Valves per Cylinder 4 valves 4 valves
Horse Power 149 HP 493 HP
Engine RPM 5200 RPM 6000 RPM
Torque 226 Nm 700 Nm
Torque RPM 4000 RPM 4500 RPM
Engine Bore Size 87.4 mm 96 mm
Engine Stroke Size 101 mm 83 mm
Engine Compression Ratio 9.4:1 10.5 : 1
Drive Type Front AWD
Transmission Type Automatic 6-speed manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1452 kg 2245 kg
Vehicle Length 4850 mm 4846 mm
Vehicle Width 1800 mm 2154 mm
Vehicle Height 1400 mm 1702 mm
Wheelbase Size 2880 mm 2895 mm