2002 MCC Crossblade vs. 2010 Honda Civic
To start off, 2010 Honda Civic is newer by 8 year(s). Which means there will be less support and parts availability for 2002 MCC Crossblade. In addition, the cost of maintenance, including insurance, on 2002 MCC Crossblade would be higher. At 1,800 cc (4 cylinders), 2010 Honda Civic is equipped with a bigger engine. In terms of performance, 2010 Honda Civic (113 HP) has 43 more horse power than 2002 MCC Crossblade. (70 HP) In normal driving conditions, 2010 Honda Civic should accelerate faster than 2002 MCC Crossblade. With that said, vehicle weight also plays an important factor in acceleration. 2010 Honda Civic weights approximately 580 kg more than 2002 MCC Crossblade. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2002 MCC Crossblade is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2002 MCC Crossblade. However, in wet, icy, snow, or gravel driving conditions, 2010 Honda Civic, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Honda Civic (148 Nm @ 4300 RPM) has 46 more torque (in Nm) than 2002 MCC Crossblade. (102 Nm @ 3210 RPM). This means 2010 Honda Civic will have an easier job in driving up hills or pulling heavy equipment than 2002 MCC Crossblade. 2010 Honda Civic has automatic transmission and 2002 MCC Crossblade has manual transmission. 2002 MCC Crossblade will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Honda Civic will be easier to drive especially in heavy traffic.
Compare all specifications:
2002 MCC Crossblade | 2010 Honda Civic | |
Make | MCC | Honda |
Model | Crossblade | Civic |
Year Released | 2002 | 2010 |
Engine Size | 599 cc | 1800 cc |
Engine Cylinders | 3 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 70 HP | 113 HP |
Torque | 102 Nm | 148 Nm |
Torque RPM | 3210 RPM | 4300 RPM |
Fuel Type | Gasoline | Natural Gas (CNG) |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 740 kg | 1320 kg |
Vehicle Length | 2630 mm | 4503 mm |
Vehicle Width | 1630 mm | 1753 mm |
Vehicle Height | 1520 mm | 1435 mm |
Wheelbase Size | 1810 mm | 2700 mm |