2002 Mitsubishi Eclipse vs. 2010 BMW 325

To start off, 2010 BMW 325 is newer by 8 year(s). Which means there will be less support and parts availability for 2002 Mitsubishi Eclipse. In addition, the cost of maintenance, including insurance, on 2002 Mitsubishi Eclipse would be higher. At 2,494 cc (6 cylinders), 2010 BMW 325 is equipped with a bigger engine. In terms of performance, 2010 BMW 325 (194 HP @ 4000 RPM) has 49 more horse power than 2002 Mitsubishi Eclipse. (145 HP @ 5500 RPM) In normal driving conditions, 2010 BMW 325 should accelerate faster than 2002 Mitsubishi Eclipse. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 306 kg more than 2002 Mitsubishi Eclipse. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 2002 Mitsubishi Eclipse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 325 (400 Nm @ 1300 RPM) has 186 more torque (in Nm) than 2002 Mitsubishi Eclipse. (214 Nm @ 4000 RPM). This means 2010 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2002 Mitsubishi Eclipse. 2010 BMW 325 has automatic transmission and 2002 Mitsubishi Eclipse has manual transmission. 2002 Mitsubishi Eclipse will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 BMW 325 will be easier to drive especially in heavy traffic.

Compare all specifications:

2002 Mitsubishi Eclipse 2010 BMW 325
Make Mitsubishi BMW
Model Eclipse 325
Year Released 2002 2010
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 2348 cc 2494 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 145 HP 194 HP
Engine RPM 5500 RPM 4000 RPM
Torque 214 Nm 400 Nm
Torque RPM 4000 RPM 1300 RPM
Engine Bore Size 87 mm 84 mm
Engine Stroke Size 100 mm 90 mm
Fuel Type Gasoline Diesel
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1290 kg 1596 kg
Vehicle Length 4500 mm 4590 mm
Vehicle Width 1760 mm 1790 mm
Vehicle Height 1320 mm 1380 mm
Wheelbase Size 2570 mm 2770 mm
Fuel Tank Capacity 62 L 61 L