2003 Alfa Romeo 156 vs. 1962 Austin-Healey 3000 Mk II
To start off, 2003 Alfa Romeo 156 is newer by 41 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 2,912 cc (6 cylinders), 1962 Austin-Healey 3000 Mk II is equipped with a bigger engine. In terms of performance, 2003 Alfa Romeo 156 (189 HP @ 6300 RPM) has 60 more horse power than 1962 Austin-Healey 3000 Mk II. (129 HP @ 4600 RPM). In normal driving conditions, 2003 Alfa Romeo 156 should accelerate faster than 1962 Austin-Healey 3000 Mk II. With that said, vehicle weight also plays an important factor in acceleration. 2003 Alfa Romeo 156 weights approximately 352 kg more than 1962 Austin-Healey 3000 Mk II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Austin-Healey 3000 Mk II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Austin-Healey 3000 Mk II. However, in wet, icy, snow, or gravel driving conditions, 2003 Alfa Romeo 156, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Alfa Romeo 156 (218 Nm @ 5000 RPM) has 51 more torque (in Nm) than 1962 Austin-Healey 3000 Mk II. (167 Nm @ 3000 RPM). This means 2003 Alfa Romeo 156 will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin-Healey 3000 Mk II. 2003 Alfa Romeo 156 has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Alfa Romeo 156 will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Alfa Romeo 156 | 1962 Austin-Healey 3000 Mk II | |
Make | Alfa Romeo | Austin-Healey |
Model | 156 | 3000 Mk II |
Year Released | 2003 | 1962 |
Engine Position | Front | Front |
Engine Size | 2387 cc | 2912 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 189 HP | 129 HP |
Engine RPM | 6300 RPM | 4600 RPM |
Torque | 218 Nm | 167 Nm |
Torque RPM | 5000 RPM | 3000 RPM |
Engine Bore Size | 88 mm | 83.4 mm |
Engine Stroke Size | 68.3 mm | 88.9 mm |
Engine Compression Ratio | 10.3:1 | 9.0:1 |
Top Speed | 227 km/hour | 181 km/hour |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 1510 kg | 1158 kg |
Vehicle Length | 4450 mm | 4010 mm |
Vehicle Width | 1750 mm | 1540 mm |
Vehicle Height | 1440 mm | 1380 mm |
Wheelbase Size | 2550 mm | 2340 mm |
Fuel Tank Capacity | 63 L | 27 L |