2003 Avanti Studebaker vs. 1963 Lancia Appia
To start off, 2003 Avanti Studebaker is newer by 40 year(s). Which means there will be less support and parts availability for 1963 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Appia would be higher. At 6,751 cc (10 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (306 HP @ 4250 RPM) has 254 more horse power than 1963 Lancia Appia. (52 HP @ 4900 RPM). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1963 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1825 kg more than 1963 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1963 Lancia Appia. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (425 Nm @ 3250 RPM) has 338 more torque (in Nm) than 1963 Lancia Appia. (87 Nm @ 3500 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Appia. 2003 Avanti Studebaker has automatic transmission and 1963 Lancia Appia has manual transmission. 1963 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Avanti Studebaker | 1963 Lancia Appia | |
Make | Avanti | Lancia |
Model | Studebaker | Appia |
Year Released | 2003 | 1963 |
Engine Position | Front | Front |
Engine Size | 6751 cc | 1090 cc |
Engine Cylinders | 10 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 306 HP | 52 HP |
Engine RPM | 4250 RPM | 4900 RPM |
Torque | 425 Nm | 87 Nm |
Torque RPM | 3250 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2775 kg | 950 kg |
Vehicle Length | 5490 mm | 4160 mm |
Vehicle Width | 2040 mm | 1520 mm |
Vehicle Height | 2040 mm | 1330 mm |
Wheelbase Size | 3410 mm | 2520 mm |