2003 Avanti Studebaker vs. 1972 Triumph Stag

To start off, 2003 Avanti Studebaker is newer by 31 year(s). Which means there will be less support and parts availability for 1972 Triumph Stag. In addition, the cost of maintenance, including insurance, on 1972 Triumph Stag would be higher. At 5,952 cc (8 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (321 HP @ 3300 RPM) has 197 more horse power than 1972 Triumph Stag. (124 HP @ 6000 RPM). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1972 Triumph Stag. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1475 kg more than 1972 Triumph Stag. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1972 Triumph Stag. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (560 Nm @ 2000 RPM) has 367 more torque (in Nm) than 1972 Triumph Stag. (193 Nm @ 3200 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1972 Triumph Stag. 2003 Avanti Studebaker has automatic transmission and 1972 Triumph Stag has manual transmission. 1972 Triumph Stag will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.

Compare all specifications:

2003 Avanti Studebaker 1972 Triumph Stag
Make Avanti Triumph
Model Studebaker Stag
Year Released 2003 1972
Engine Position Front Front
Engine Size 5952 cc 2997 cc
Engine Cylinders 8 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 321 HP 124 HP
Engine RPM 3300 RPM 6000 RPM
Torque 560 Nm 193 Nm
Torque RPM 2000 RPM 3200 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD Rear
Transmission Type Automatic Manual
Vehicle Weight 2675 kg 1200 kg
Vehicle Length 5490 mm 4430 mm
Vehicle Width 2040 mm 1620 mm
Vehicle Height 2040 mm 1260 mm
Wheelbase Size 3410 mm 2550 mm