2003 Avanti Studebaker vs. 1975 Lancia Beta
To start off, 2003 Avanti Studebaker is newer by 28 year(s). Which means there will be less support and parts availability for 1975 Lancia Beta. In addition, the cost of maintenance, including insurance, on 1975 Lancia Beta would be higher. At 5,952 cc (8 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (321 HP @ 3300 RPM) has 206 more horse power than 1975 Lancia Beta. (115 HP @ 5500 RPM). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1975 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1615 kg more than 1975 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1975 Lancia Beta. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (560 Nm @ 2000 RPM) has 384 more torque (in Nm) than 1975 Lancia Beta. (176 Nm @ 2800 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1975 Lancia Beta. 2003 Avanti Studebaker has automatic transmission and 1975 Lancia Beta has manual transmission. 1975 Lancia Beta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Avanti Studebaker | 1975 Lancia Beta | |
Make | Avanti | Lancia |
Model | Studebaker | Beta |
Year Released | 2003 | 1975 |
Engine Position | Front | Front |
Engine Size | 5952 cc | 1995 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 321 HP | 115 HP |
Engine RPM | 3300 RPM | 5500 RPM |
Torque | 560 Nm | 176 Nm |
Torque RPM | 2000 RPM | 2800 RPM |
Drive Type | 4WD | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2675 kg | 1060 kg |
Vehicle Length | 5490 mm | 4290 mm |
Vehicle Width | 2040 mm | 1660 mm |
Vehicle Height | 2040 mm | 1330 mm |
Wheelbase Size | 3410 mm | 2550 mm |