2003 Avanti Studebaker vs. 1980 Toyota Corolla
To start off, 2003 Avanti Studebaker is newer by 23 year(s). Which means there will be less support and parts availability for 1980 Toyota Corolla. In addition, the cost of maintenance, including insurance, on 1980 Toyota Corolla would be higher. At 6,751 cc (10 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (306 HP) has 247 more horse power than 1980 Toyota Corolla. (59 HP). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1980 Toyota Corolla. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1935 kg more than 1980 Toyota Corolla. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1980 Toyota Corolla. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (425 Nm @ 3250 RPM) has 332 more torque (in Nm) than 1980 Toyota Corolla. (93 Nm @ 3600 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1980 Toyota Corolla. 2003 Avanti Studebaker has automatic transmission and 1980 Toyota Corolla has manual transmission. 1980 Toyota Corolla will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Avanti Studebaker | 1980 Toyota Corolla | |
Make | Avanti | Toyota |
Model | Studebaker | Corolla |
Year Released | 2003 | 1980 |
Engine Position | Front | Front |
Engine Size | 6751 cc | 1290 cc |
Engine Cylinders | 10 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 306 HP | 59 HP |
Torque | 425 Nm | 93 Nm |
Torque RPM | 3250 RPM | 3600 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2775 kg | 840 kg |
Vehicle Length | 5490 mm | 4060 mm |
Vehicle Width | 2040 mm | 1620 mm |
Vehicle Height | 2040 mm | 1400 mm |
Wheelbase Size | 3410 mm | 2410 mm |