2003 Avanti Studebaker vs. 1983 Lancia Prisma

To start off, 2003 Avanti Studebaker is newer by 20 year(s). Which means there will be less support and parts availability for 1983 Lancia Prisma. In addition, the cost of maintenance, including insurance, on 1983 Lancia Prisma would be higher. At 5,952 cc (8 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (321 HP @ 3300 RPM) has 236 more horse power than 1983 Lancia Prisma. (85 HP @ 5800 RPM). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1983 Lancia Prisma. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1725 kg more than 1983 Lancia Prisma. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1983 Lancia Prisma. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (560 Nm @ 2000 RPM) has 431 more torque (in Nm) than 1983 Lancia Prisma. (129 Nm @ 3500 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1983 Lancia Prisma. 2003 Avanti Studebaker has automatic transmission and 1983 Lancia Prisma has manual transmission. 1983 Lancia Prisma will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.

Compare all specifications:

2003 Avanti Studebaker 1983 Lancia Prisma
Make Avanti Lancia
Model Studebaker Prisma
Year Released 2003 1983
Engine Position Front Front
Engine Size 5952 cc 1497 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 321 HP 85 HP
Engine RPM 3300 RPM 5800 RPM
Torque 560 Nm 129 Nm
Torque RPM 2000 RPM 3500 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD Front
Transmission Type Automatic Manual
Vehicle Weight 2675 kg 950 kg
Vehicle Length 5490 mm 4190 mm
Vehicle Width 2040 mm 1630 mm
Vehicle Height 2040 mm 1390 mm
Wheelbase Size 3410 mm 2660 mm