2003 Avanti Studebaker vs. 1990 BMW M3
To start off, 2003 Avanti Studebaker is newer by 13 year(s). Which means there will be less support and parts availability for 1990 BMW M3. In addition, the cost of maintenance, including insurance, on 1990 BMW M3 would be higher. At 5,952 cc (8 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (321 HP @ 3300 RPM) has 83 more horse power than 1990 BMW M3. (238 HP @ 7000 RPM). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1990 BMW M3. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1475 kg more than 1990 BMW M3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1990 BMW M3. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (560 Nm @ 2000 RPM) has 320 more torque (in Nm) than 1990 BMW M3. (240 Nm @ 4750 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1990 BMW M3. 2003 Avanti Studebaker has automatic transmission and 1990 BMW M3 has manual transmission. 1990 BMW M3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Avanti Studebaker | 1990 BMW M3 | |
Make | Avanti | BMW |
Model | Studebaker | M3 |
Year Released | 2003 | 1990 |
Engine Position | Front | Front |
Engine Size | 5952 cc | 2467 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 321 HP | 238 HP |
Engine RPM | 3300 RPM | 7000 RPM |
Torque | 560 Nm | 240 Nm |
Torque RPM | 2000 RPM | 4750 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2675 kg | 1200 kg |
Vehicle Length | 5490 mm | 4320 mm |
Vehicle Width | 2040 mm | 1510 mm |
Vehicle Height | 2040 mm | 1360 mm |
Wheelbase Size | 3410 mm | 2570 mm |