2003 Avanti Studebaker vs. 1991 Lancia Delta
To start off, 2003 Avanti Studebaker is newer by 12 year(s). Which means there will be less support and parts availability for 1991 Lancia Delta. In addition, the cost of maintenance, including insurance, on 1991 Lancia Delta would be higher. At 6,751 cc (10 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (306 HP @ 4250 RPM) has 98 more horse power than 1991 Lancia Delta. (208 HP @ 5750 RPM). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1991 Lancia Delta. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1475 kg more than 1991 Lancia Delta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (425 Nm @ 3250 RPM) has 115 more torque (in Nm) than 1991 Lancia Delta. (310 Nm @ 3500 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1991 Lancia Delta. 2003 Avanti Studebaker has automatic transmission and 1991 Lancia Delta has manual transmission. 1991 Lancia Delta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Avanti Studebaker | 1991 Lancia Delta | |
Make | Avanti | Lancia |
Model | Studebaker | Delta |
Year Released | 2003 | 1991 |
Engine Position | Front | Front |
Engine Size | 6751 cc | 1995 cc |
Engine Cylinders | 10 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 306 HP | 208 HP |
Engine RPM | 4250 RPM | 5750 RPM |
Torque | 425 Nm | 310 Nm |
Torque RPM | 3250 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | 4WD |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2775 kg | 1300 kg |
Vehicle Length | 5490 mm | 3910 mm |
Vehicle Width | 2040 mm | 1780 mm |
Vehicle Height | 2040 mm | 1380 mm |
Wheelbase Size | 3410 mm | 2490 mm |