2003 Avanti Studebaker vs. 2013 Honda CR-Z
To start off, 2013 Honda CR-Z is newer by 10 year(s). Which means there will be less support and parts availability for 2003 Avanti Studebaker. In addition, the cost of maintenance, including insurance, on 2003 Avanti Studebaker would be higher. At 6,751 cc (10 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (306 HP @ 4250 RPM) has 186 more horse power than 2013 Honda CR-Z. (120 HP @ 6000 RPM). In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 2013 Honda CR-Z. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1579 kg more than 2013 Honda CR-Z. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 2013 Honda CR-Z. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (425 Nm @ 3250 RPM) has 251 more torque (in Nm) than 2013 Honda CR-Z. (174 Nm @ 1750 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 2013 Honda CR-Z. 2003 Avanti Studebaker has automatic transmission and 2013 Honda CR-Z has manual transmission. 2013 Honda CR-Z will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2003 Avanti Studebaker | 2013 Honda CR-Z | |
| Make | Avanti | Honda |
| Model | Studebaker | CR-Z |
| Year Released | 2003 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 6751 cc | 1497 cc |
| Engine Cylinders | 10 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 306 HP | 120 HP |
| Engine RPM | 4250 RPM | 6000 RPM |
| Torque | 425 Nm | 174 Nm |
| Torque RPM | 3250 RPM | 1750 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | 4WD | Front |
| Transmission Type | Automatic | 6-speed manual |
| Vehicle Weight | 2775 kg | 1196 kg |
| Vehicle Length | 5490 mm | 4079 mm |
| Vehicle Width | 2040 mm | 1740 mm |
| Vehicle Height | 2040 mm | 1394 mm |
| Wheelbase Size | 3410 mm | 2435 mm |
