2003 Beijing BJ 2020 vs. 1997 Jeep Wrangler

To start off, 2003 Beijing BJ 2020 is newer by 6 year(s). Which means there will be less support and parts availability for 1997 Jeep Wrangler. In addition, the cost of maintenance, including insurance, on 1997 Jeep Wrangler would be higher. At 2,464 cc (4 cylinders), 1997 Jeep Wrangler is equipped with a bigger engine. In terms of performance, 1997 Jeep Wrangler (116 HP @ 5200 RPM) has 29 more horse power than 2003 Beijing BJ 2020. (87 HP @ 3800 RPM) In normal driving conditions, 1997 Jeep Wrangler should accelerate faster than 2003 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 2003 Beijing BJ 2020 weights approximately 150 kg more than 1997 Jeep Wrangler.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Jeep Wrangler (185 Nm @ 3600 RPM) has 12 more torque (in Nm) than 2003 Beijing BJ 2020. (173 Nm @ 3000 RPM). This means 1997 Jeep Wrangler will have an easier job in driving up hills or pulling heavy equipment than 2003 Beijing BJ 2020.

Compare all specifications:

2003 Beijing BJ 2020 1997 Jeep Wrangler
Make Beijing Jeep
Model BJ 2020 Wrangler
Year Released 2003 1997
Engine Size 2445 cc 2464 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 87 HP 116 HP
Engine RPM 3800 RPM 5200 RPM
Torque 173 Nm 185 Nm
Torque RPM 3000 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 1580 kg 1430 kg
Vehicle Length 4020 mm 3860 mm
Vehicle Width 1780 mm 1700 mm
Vehicle Height 1950 mm 1790 mm
Wheelbase Size 2310 mm 2380 mm