2003 Chrysler Concorde vs. 1957 Lancia Appia
To start off, 2003 Chrysler Concorde is newer by 46 year(s). Which means there will be less support and parts availability for 1957 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1957 Lancia Appia would be higher. At 2,736 cc (6 cylinders), 2003 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 2003 Chrysler Concorde (190 HP @ 5700 RPM) has 138 more horse power than 1957 Lancia Appia. (52 HP @ 5000 RPM). In normal driving conditions, 2003 Chrysler Concorde should accelerate faster than 1957 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2003 Chrysler Concorde weights approximately 738 kg more than 1957 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1957 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2003 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Chrysler Concorde (258 Nm @ 4850 RPM) has 171 more torque (in Nm) than 1957 Lancia Appia. (87 Nm @ 3500 RPM). This means 2003 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1957 Lancia Appia. 2003 Chrysler Concorde has automatic transmission and 1957 Lancia Appia has manual transmission. 1957 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2003 Chrysler Concorde | 1957 Lancia Appia | |
| Make | Chrysler | Lancia |
| Model | Concorde | Appia |
| Year Released | 2003 | 1957 |
| Engine Position | Front | Front |
| Engine Size | 2736 cc | 1091 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | V |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 190 HP | 52 HP |
| Engine RPM | 5700 RPM | 5000 RPM |
| Torque | 258 Nm | 87 Nm |
| Torque RPM | 4850 RPM | 3500 RPM |
| Engine Bore Size | 86 mm | 68 mm |
| Engine Stroke Size | 78.5 mm | 75 mm |
| Engine Compression Ratio | 10.0:1 | 8.0:1 |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1578 kg | 840 kg |
| Vehicle Length | 5320 mm | 3990 mm |
| Vehicle Width | 1900 mm | 1440 mm |
| Vehicle Height | 1420 mm | 1240 mm |
| Wheelbase Size | 2880 mm | 2520 mm |
