2003 Chrysler Pacifica vs. 1955 Sunbeam Alpine
To start off, 2003 Chrysler Pacifica is newer by 48 year(s). Which means there will be less support and parts availability for 1955 Sunbeam Alpine. In addition, the cost of maintenance, including insurance, on 1955 Sunbeam Alpine would be higher. At 3,518 cc (6 cylinders), 2003 Chrysler Pacifica is equipped with a bigger engine. In terms of performance, 2003 Chrysler Pacifica (254 HP @ 6400 RPM) has 174 more horse power than 1955 Sunbeam Alpine. (80 HP @ 4200 RPM). In normal driving conditions, 2003 Chrysler Pacifica should accelerate faster than 1955 Sunbeam Alpine. With that said, vehicle weight also plays an important factor in acceleration. 2003 Chrysler Pacifica weights approximately 724 kg more than 1955 Sunbeam Alpine. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Sunbeam Alpine is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Sunbeam Alpine. However, in wet, icy, snow, or gravel driving conditions, 2003 Chrysler Pacifica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Chrysler Pacifica (339 Nm @ 3950 RPM) has 176 more torque (in Nm) than 1955 Sunbeam Alpine. (163 Nm @ 2400 RPM). This means 2003 Chrysler Pacifica will have an easier job in driving up hills or pulling heavy equipment than 1955 Sunbeam Alpine. 2003 Chrysler Pacifica has automatic transmission and 1955 Sunbeam Alpine has manual transmission. 1955 Sunbeam Alpine will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Chrysler Pacifica will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Chrysler Pacifica | 1955 Sunbeam Alpine | |
Make | Chrysler | Sunbeam |
Model | Pacifica | Alpine |
Year Released | 2003 | 1955 |
Engine Position | Front | Front |
Engine Size | 3518 cc | 2267 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 254 HP | 80 HP |
Engine RPM | 6400 RPM | 4200 RPM |
Torque | 339 Nm | 163 Nm |
Torque RPM | 3950 RPM | 2400 RPM |
Engine Compression Ratio | 10.0:1 | 7.4:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 7 seats | 4 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 2024 kg | 1300 kg |
Vehicle Length | 5060 mm | 4280 mm |
Vehicle Width | 2020 mm | 1590 mm |
Vehicle Height | 1700 mm | 1480 mm |
Wheelbase Size | 2960 mm | 2480 mm |
Fuel Tank Capacity | 87 L | 45 L |