2003 Chrysler PT Cruiser vs. 1992 Honda Integra

To start off, 2003 Chrysler PT Cruiser is newer by 11 year(s). Which means there will be less support and parts availability for 1992 Honda Integra. In addition, the cost of maintenance, including insurance, on 1992 Honda Integra would be higher. At 2,399 cc (4 cylinders), 2003 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2003 Chrysler PT Cruiser (215 HP @ 5000 RPM) has 109 more horse power than 1992 Honda Integra. (106 HP @ 6300 RPM). In normal driving conditions, 2003 Chrysler PT Cruiser should accelerate faster than 1992 Honda Integra. With that said, vehicle weight also plays an important factor in acceleration. 2003 Chrysler PT Cruiser weights approximately 495 kg more than 1992 Honda Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Chrysler PT Cruiser (339 Nm @ 3600 RPM) has 205 more torque (in Nm) than 1992 Honda Integra. (134 Nm @ 4500 RPM). This means 2003 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1992 Honda Integra. 2003 Chrysler PT Cruiser has automatic transmission and 1992 Honda Integra has manual transmission. 1992 Honda Integra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.

Compare all specifications:

2003 Chrysler PT Cruiser 1992 Honda Integra
Make Chrysler Honda
Model PT Cruiser Integra
Year Released 2003 1992
Body Type Hatchback Coupe
Engine Position Front Front
Engine Size 2399 cc 1588 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 215 HP 106 HP
Engine RPM 5000 RPM 6300 RPM
Torque 339 Nm 134 Nm
Torque RPM 3600 RPM 4500 RPM
Engine Bore Size 87.5 mm 81 mm
Engine Stroke Size 101.4 mm 77.4 mm
Engine Compression Ratio 8.1:1 9.0:1
Drive Type Front Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1505 kg 1010 kg
Vehicle Length 4290 mm 4400 mm
Vehicle Width 1710 mm 1700 mm
Vehicle Height 1610 mm 1330 mm
Wheelbase Size 2620 mm 2560 mm