2003 Chrysler Sebring vs. 1972 Jensen Interceptor

To start off, 2003 Chrysler Sebring is newer by 31 year(s). Which means there will be less support and parts availability for 1972 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1972 Jensen Interceptor would be higher. At 7,206 cc (8 cylinders), 1972 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1972 Jensen Interceptor (284 HP @ 4800 RPM) has 84 more horse power than 2003 Chrysler Sebring. (200 HP @ 5800 RPM) In normal driving conditions, 1972 Jensen Interceptor should accelerate faster than 2003 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1972 Jensen Interceptor weights approximately 283 kg more than 2003 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 2003 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Jensen Interceptor (515 Nm @ 3200 RPM) has 253 more torque (in Nm) than 2003 Chrysler Sebring. (262 Nm @ 4300 RPM). This means 1972 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 2003 Chrysler Sebring.

Compare all specifications:

2003 Chrysler Sebring 1972 Jensen Interceptor
Make Chrysler Jensen
Model Sebring Interceptor
Year Released 2003 1972
Engine Position Front Front
Engine Size 2736 cc 7206 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type V V
Valves per Cylinder 4 valves 2 valves
Horse Power 200 HP 284 HP
Engine RPM 5800 RPM 4800 RPM
Torque 262 Nm 515 Nm
Torque RPM 4300 RPM 3200 RPM
Engine Bore Size 86 mm 109.7 mm
Engine Stroke Size 78.5 mm 95.3 mm
Engine Compression Ratio 9.7:1 8.2:1
Drive Type Front Rear
Transmission Type Automatic Automatic
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1535 kg 1818 kg
Vehicle Length 4850 mm 4780 mm
Vehicle Width 1800 mm 1760 mm
Vehicle Height 1400 mm 1350 mm
Wheelbase Size 2750 mm 2670 mm
Fuel Tank Capacity 61 L 90 L