2003 Chrysler Sebring vs. 1978 Holden GTS

To start off, 2003 Chrysler Sebring is newer by 25 year(s). Which means there will be less support and parts availability for 1978 Holden GTS. In addition, the cost of maintenance, including insurance, on 1978 Holden GTS would be higher. At 4,141 cc (8 cylinders), 1978 Holden GTS is equipped with a bigger engine. In terms of performance, 1978 Holden GTS (158 HP @ 4550 RPM) has 12 more horse power than 2003 Chrysler Sebring. (146 HP @ 5700 RPM) In normal driving conditions, 1978 Holden GTS should accelerate faster than 2003 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2003 Chrysler Sebring weights approximately 55 kg more than 1978 Holden GTS.

Because 1978 Holden GTS is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 Holden GTS. However, in wet, icy, snow, or gravel driving conditions, 2003 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Holden GTS (327 Nm @ 2600 RPM) has 139 more torque (in Nm) than 2003 Chrysler Sebring. (188 Nm @ 4350 RPM). This means 1978 Holden GTS will have an easier job in driving up hills or pulling heavy equipment than 2003 Chrysler Sebring. 1978 Holden GTS has automatic transmission and 2003 Chrysler Sebring has manual transmission. 2003 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1978 Holden GTS will be easier to drive especially in heavy traffic.

Compare all specifications:

2003 Chrysler Sebring 1978 Holden GTS
Make Chrysler Holden
Model Sebring GTS
Year Released 2003 1978
Engine Position Front Front
Engine Size 1996 cc 4141 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 146 HP 158 HP
Engine RPM 5700 RPM 4550 RPM
Torque 188 Nm 327 Nm
Torque RPM 4350 RPM 2600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Vehicle Weight 1530 kg 1475 kg
Vehicle Length 4930 mm 4850 mm
Vehicle Width 1800 mm 1880 mm
Vehicle Height 1410 mm 1400 mm
Wheelbase Size 2700 mm 2830 mm