2003 Chrysler Sebring vs. 2010 Ford Crown Victoria
To start off, 2010 Ford Crown Victoria is newer by 7 year(s). Which means there will be less support and parts availability for 2003 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2003 Chrysler Sebring would be higher. At 4,604 cc (8 cylinders), 2010 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2010 Ford Crown Victoria (239 HP @ 4750 RPM) has 93 more horse power than 2003 Chrysler Sebring. (146 HP @ 5700 RPM) In normal driving conditions, 2010 Ford Crown Victoria should accelerate faster than 2003 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Crown Victoria weights approximately 1326 kg more than 2003 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2003 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford Crown Victoria (374 Nm @ 4000 RPM) has 186 more torque (in Nm) than 2003 Chrysler Sebring. (188 Nm @ 4350 RPM). This means 2010 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2003 Chrysler Sebring. 2010 Ford Crown Victoria has automatic transmission and 2003 Chrysler Sebring has manual transmission. 2003 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Chrysler Sebring | 2010 Ford Crown Victoria | |
Make | Chrysler | Ford |
Model | Sebring | Crown Victoria |
Year Released | 2003 | 2010 |
Body Type | Convertible | Sedan |
Engine Position | Front | Front |
Engine Size | 1996 cc | 4604 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 146 HP | 239 HP |
Engine RPM | 5700 RPM | 4750 RPM |
Torque | 188 Nm | 374 Nm |
Torque RPM | 4350 RPM | 4000 RPM |
Engine Bore Size | 87.5 mm | 90.2 mm |
Engine Stroke Size | 83 mm | 90 mm |
Engine Compression Ratio | 9.0:1 | 9.4:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1530 kg | 2856 kg |
Vehicle Length | 4930 mm | 5390 mm |
Vehicle Width | 1800 mm | 1970 mm |
Vehicle Height | 1410 mm | 1450 mm |
Wheelbase Size | 2700 mm | 2920 mm |
Fuel Tank Capacity | 61 L | 72 L |