2003 Daihatsu Copen vs. 2002 Lancia Thesis
To start off, 2003 Daihatsu Copen is newer by 1 year(s). Which means there will be less support and parts availability for 2002 Lancia Thesis. In addition, the cost of maintenance, including insurance, on 2002 Lancia Thesis would be higher. At 1,999 cc (5 cylinders), 2002 Lancia Thesis is equipped with a bigger engine. In terms of performance, 2002 Lancia Thesis (185 HP @ 4100 RPM) has 118 more horse power than 2003 Daihatsu Copen. (67 HP @ 6000 RPM) In normal driving conditions, 2002 Lancia Thesis should accelerate faster than 2003 Daihatsu Copen. With that said, vehicle weight also plays an important factor in acceleration. 2002 Lancia Thesis weights approximately 845 kg more than 2003 Daihatsu Copen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Lancia Thesis (305 Nm) has 203 more torque (in Nm) than 2003 Daihatsu Copen. (102 Nm). This means 2002 Lancia Thesis will have an easier job in driving up hills or pulling heavy equipment than 2003 Daihatsu Copen. 2002 Lancia Thesis has automatic transmission and 2003 Daihatsu Copen has manual transmission. 2003 Daihatsu Copen will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Lancia Thesis will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Daihatsu Copen | 2002 Lancia Thesis | |
Make | Daihatsu | Lancia |
Model | Copen | Thesis |
Year Released | 2003 | 2002 |
Body Type | Roadster | Sedan |
Engine Position | Front | Front |
Engine Size | 657 cc | 1999 cc |
Engine Cylinders | 4 cylinders | 5 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 67 HP | 185 HP |
Engine RPM | 6000 RPM | 4100 RPM |
Torque | 102 Nm | 305 Nm |
Engine Bore Size | 61 mm | 82 mm |
Engine Stroke Size | 56.4 mm | 75.7 mm |
Engine Compression Ratio | 8.0:1 | 8.5:1 |
Drive Type | Front | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 850 kg | 1695 kg |
Vehicle Length | 3400 mm | 4880 mm |
Vehicle Height | 1250 mm | 1480 mm |
Wheelbase Size | 2240 mm | 2600 mm |