2003 Daihatsu Copen vs. 2008 Fiat Palio
To start off, 2008 Fiat Palio is newer by 5 year(s). Which means there will be less support and parts availability for 2003 Daihatsu Copen. In addition, the cost of maintenance, including insurance, on 2003 Daihatsu Copen would be higher. At 1,298 cc (4 cylinders), 2003 Daihatsu Copen is equipped with a bigger engine. In terms of performance, 2008 Fiat Palio (90 HP @ 6000 RPM) has 4 more horse power than 2003 Daihatsu Copen. (86 HP @ 6000 RPM) In normal driving conditions, 2008 Fiat Palio should accelerate faster than 2003 Daihatsu Copen. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Palio weights approximately 85 kg more than 2003 Daihatsu Copen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Daihatsu Copen (120 Nm) has 18 more torque (in Nm) than 2008 Fiat Palio. (102 Nm). This means 2003 Daihatsu Copen will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Palio.
Compare all specifications:
2003 Daihatsu Copen | 2008 Fiat Palio | |
Make | Daihatsu | Fiat |
Model | Copen | Palio |
Year Released | 2003 | 2008 |
Engine Position | Front | Front |
Engine Size | 1298 cc | 1242 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 86 HP | 90 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 120 Nm | 102 Nm |
Drive Type | Front | Front |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 860 kg | 945 kg |
Vehicle Length | 3510 mm | 3830 mm |
Vehicle Width | 1610 mm | 1440 mm |
Vehicle Height | 1270 mm | 1640 mm |
Wheelbase Size | 2240 mm | 2380 mm |