2003 Fiat Idea vs. 1950 Holden FX

To start off, 2003 Fiat Idea is newer by 53 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 2003 Fiat Idea (94 HP) has 43 more horse power than 1950 Holden FX. (51 HP). In normal driving conditions, 2003 Fiat Idea should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 2003 Fiat Idea weights approximately 190 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1950 Holden FX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Holden FX. However, in wet, icy, snow, or gravel driving conditions, 2003 Fiat Idea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Holden FX (136 Nm) has 8 more torque (in Nm) than 2003 Fiat Idea. (128 Nm). This means 1950 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 2003 Fiat Idea.

Compare all specifications:

2003 Fiat Idea 1950 Holden FX
Make Fiat Holden
Model Idea FX
Year Released 2003 1950
Engine Position Front Front
Engine Size 1367 cc 2165 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 94 HP 51 HP
Torque 128 Nm 136 Nm
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Vehicle Weight 1160 kg 970 kg
Vehicle Length 3940 mm 4380 mm
Vehicle Width 1710 mm 1710 mm
Vehicle Height 1670 mm 1580 mm