2003 Fiat Idea vs. 1974 Seat 1430

To start off, 2003 Fiat Idea is newer by 29 year(s). Which means there will be less support and parts availability for 1974 Seat 1430. In addition, the cost of maintenance, including insurance, on 1974 Seat 1430 would be higher. At 1,438 cc (4 cylinders), 1974 Seat 1430 is equipped with a bigger engine. In terms of performance, 1974 Seat 1430 (70 HP @ 5400 RPM) has 1 more horse power than 2003 Fiat Idea. (69 HP @ 4000 RPM) In normal driving conditions, 1974 Seat 1430 should accelerate faster than 2003 Fiat Idea. With that said, vehicle weight also plays an important factor in acceleration. 2003 Fiat Idea weights approximately 270 kg more than 1974 Seat 1430.

Because 1974 Seat 1430 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1974 Seat 1430. However, in wet, icy, snow, or gravel driving conditions, 2003 Fiat Idea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Fiat Idea (180 Nm @ 1750 RPM) has 68 more torque (in Nm) than 1974 Seat 1430. (112 Nm @ 3300 RPM). This means 2003 Fiat Idea will have an easier job in driving up hills or pulling heavy equipment than 1974 Seat 1430.

Compare all specifications:

2003 Fiat Idea 1974 Seat 1430
Make Fiat Seat
Model Idea 1430
Year Released 2003 1974
Body Type Hatchback Sedan
Engine Position Front Front
Engine Size 1247 cc 1438 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 69 HP 70 HP
Engine RPM 4000 RPM 5400 RPM
Torque 180 Nm 112 Nm
Torque RPM 1750 RPM 3300 RPM
Drive Type Front Rear
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1200 kg 930 kg
Vehicle Length 3940 mm 4030 mm
Vehicle Width 1700 mm 1630 mm
Vehicle Height 1670 mm 1430 mm
Wheelbase Size 2610 mm 2430 mm