2003 Fiat Idea vs. 1975 Lancia Fulvia
To start off, 2003 Fiat Idea is newer by 28 year(s). Which means there will be less support and parts availability for 1975 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1975 Lancia Fulvia would be higher. At 1,584 cc (4 cylinders), 1975 Lancia Fulvia is equipped with a bigger engine. In terms of performance, 1975 Lancia Fulvia (114 HP @ 6000 RPM) has 20 more horse power than 2003 Fiat Idea. (94 HP @ 5800 RPM) In normal driving conditions, 1975 Lancia Fulvia should accelerate faster than 2003 Fiat Idea. With that said, vehicle weight also plays an important factor in acceleration. 2003 Fiat Idea weights approximately 160 kg more than 1975 Lancia Fulvia.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Lancia Fulvia (153 Nm) has 25 more torque (in Nm) than 2003 Fiat Idea. (128 Nm). This means 1975 Lancia Fulvia will have an easier job in driving up hills or pulling heavy equipment than 2003 Fiat Idea.
Compare all specifications:
2003 Fiat Idea | 1975 Lancia Fulvia | |
Make | Fiat | Lancia |
Model | Idea | Fulvia |
Year Released | 2003 | 1975 |
Body Type | Hatchback | Coupe |
Engine Position | Front | Front |
Engine Size | 1367 cc | 1584 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 94 HP | 114 HP |
Engine RPM | 5800 RPM | 6000 RPM |
Torque | 128 Nm | 153 Nm |
Engine Bore Size | 72 mm | 82 mm |
Engine Stroke Size | 84 mm | 75 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 1160 kg | 1000 kg |
Vehicle Length | 3940 mm | 3990 mm |
Vehicle Width | 1710 mm | 1570 mm |
Vehicle Height | 1670 mm | 1330 mm |