2003 Fiat Idea vs. 1990 Holden Gemini
To start off, 2003 Fiat Idea is newer by 13 year(s). Which means there will be less support and parts availability for 1990 Holden Gemini. In addition, the cost of maintenance, including insurance, on 1990 Holden Gemini would be higher. At 1,471 cc (4 cylinders), 1990 Holden Gemini is equipped with a bigger engine. In terms of performance, 2003 Fiat Idea (78 HP @ 5000 RPM) has 6 more horse power than 1990 Holden Gemini. (72 HP @ 5600 RPM). In normal driving conditions, 2003 Fiat Idea should accelerate faster than 1990 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 2003 Fiat Idea weights approximately 298 kg more than 1990 Holden Gemini. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Holden Gemini (116 Nm @ 3600 RPM) has 2 more torque (in Nm) than 2003 Fiat Idea. (114 Nm @ 4000 RPM). This means 1990 Holden Gemini will have an easier job in driving up hills or pulling heavy equipment than 2003 Fiat Idea.
Compare all specifications:
2003 Fiat Idea | 1990 Holden Gemini | |
Make | Fiat | Holden |
Model | Idea | Gemini |
Year Released | 2003 | 1990 |
Engine Position | Front | Front |
Engine Size | 1242 cc | 1471 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 78 HP | 72 HP |
Engine RPM | 5000 RPM | 5600 RPM |
Torque | 114 Nm | 116 Nm |
Torque RPM | 4000 RPM | 3600 RPM |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1158 kg | 860 kg |
Vehicle Length | 3940 mm | 4040 mm |
Vehicle Width | 1700 mm | 1610 mm |
Vehicle Height | 1670 mm | 1380 mm |
Wheelbase Size | 2550 mm | 2410 mm |