2003 Fiat Panda vs. 1971 Jensen Interceptor
To start off, 2003 Fiat Panda is newer by 32 year(s). Which means there will be less support and parts availability for 1971 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1971 Jensen Interceptor would be higher. At 6,286 cc (8 cylinders), 1971 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1971 Jensen Interceptor (300 HP @ 4800 RPM) has 243 more horse power than 2003 Fiat Panda. (57 HP @ 5000 RPM) In normal driving conditions, 1971 Jensen Interceptor should accelerate faster than 2003 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1971 Jensen Interceptor weights approximately 954 kg more than 2003 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 2003 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Jensen Interceptor (556 Nm @ 3400 RPM) has 454 more torque (in Nm) than 2003 Fiat Panda. (102 Nm @ 2500 RPM). This means 1971 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 2003 Fiat Panda. 1971 Jensen Interceptor has automatic transmission and 2003 Fiat Panda has manual transmission. 2003 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1971 Jensen Interceptor will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Fiat Panda | 1971 Jensen Interceptor | |
Make | Fiat | Jensen |
Model | Panda | Interceptor |
Year Released | 2003 | 1971 |
Engine Position | Front | Front |
Engine Size | 1249 cc | 6286 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 57 HP | 300 HP |
Engine RPM | 5000 RPM | 4800 RPM |
Torque | 102 Nm | 556 Nm |
Torque RPM | 2500 RPM | 3400 RPM |
Engine Bore Size | 70.8 mm | 108 mm |
Engine Stroke Size | 78.9 mm | 85.9 mm |
Engine Compression Ratio | 11.0:1 | 8.5:1 |
Top Speed | 155 km/hour | 217 km/hour |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 860 kg | 1814 kg |
Vehicle Length | 3540 mm | 4780 mm |
Vehicle Width | 1580 mm | 1760 mm |
Vehicle Height | 1550 mm | 1350 mm |
Wheelbase Size | 2350 mm | 2670 mm |
Fuel Tank Capacity | 35 L | 90 L |