2003 Fiat Panda vs. 1993 Mercedes-Benz 200
To start off, 2003 Fiat Panda is newer by 10 year(s). Which means there will be less support and parts availability for 1993 Mercedes-Benz 200. In addition, the cost of maintenance, including insurance, on 1993 Mercedes-Benz 200 would be higher. At 1,995 cc (4 cylinders), 1993 Mercedes-Benz 200 is equipped with a bigger engine. In terms of performance, 1993 Mercedes-Benz 200 (141 HP @ 5500 RPM) has 70 more horse power than 2003 Fiat Panda. (71 HP @ 4100 RPM) In normal driving conditions, 1993 Mercedes-Benz 200 should accelerate faster than 2003 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1993 Mercedes-Benz 200 weights approximately 455 kg more than 2003 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1993 Mercedes-Benz 200 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Mercedes-Benz 200. However, in wet, icy, snow, or gravel driving conditions, 2003 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Mercedes-Benz 200 (273 Nm @ 2000 RPM) has 92 more torque (in Nm) than 2003 Fiat Panda. (181 Nm @ 1750 RPM). This means 1993 Mercedes-Benz 200 will have an easier job in driving up hills or pulling heavy equipment than 2003 Fiat Panda. 1993 Mercedes-Benz 200 has automatic transmission and 2003 Fiat Panda has manual transmission. 2003 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Mercedes-Benz 200 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2003 Fiat Panda | 1993 Mercedes-Benz 200 | |
| Make | Fiat | Mercedes-Benz |
| Model | Panda | 200 |
| Year Released | 2003 | 1993 |
| Engine Position | Front | Front |
| Engine Size | 1368 cc | 1995 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 71 HP | 141 HP |
| Engine RPM | 4100 RPM | 5500 RPM |
| Torque | 181 Nm | 273 Nm |
| Torque RPM | 1750 RPM | 2000 RPM |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 5 doors | 4 doors |
| Vehicle Weight | 935 kg | 1390 kg |
| Vehicle Length | 3540 mm | 4490 mm |
| Vehicle Width | 1600 mm | 1730 mm |
| Vehicle Height | 1550 mm | 1420 mm |
| Wheelbase Size | 2310 mm | 2700 mm |
