2003 Fiat Panda vs. 2008 Mercedes-Benz CL
To start off, 2008 Mercedes-Benz CL is newer by 5 year(s). Which means there will be less support and parts availability for 2003 Fiat Panda. In addition, the cost of maintenance, including insurance, on 2003 Fiat Panda would be higher. At 5,461 cc (8 cylinders), 2008 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2008 Mercedes-Benz CL (383 HP @ 6000 RPM) has 314 more horse power than 2003 Fiat Panda. (69 HP @ 4000 RPM) In normal driving conditions, 2008 Mercedes-Benz CL should accelerate faster than 2003 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz CL weights approximately 1134 kg more than 2003 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 2003 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz CL (531 Nm @ 2800 RPM) has 387 more torque (in Nm) than 2003 Fiat Panda. (144 Nm @ 1500 RPM). This means 2008 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2003 Fiat Panda. 2008 Mercedes-Benz CL has automatic transmission and 2003 Fiat Panda has manual transmission. 2003 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercedes-Benz CL will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2003 Fiat Panda | 2008 Mercedes-Benz CL | |
| Make | Fiat | Mercedes-Benz |
| Model | Panda | CL |
| Year Released | 2003 | 2008 |
| Body Type | Hatchback | Coupe |
| Engine Position | Front | Front |
| Engine Size | 1251 cc | 5461 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 3 valves |
| Horse Power | 69 HP | 383 HP |
| Engine RPM | 4000 RPM | 6000 RPM |
| Torque | 144 Nm | 531 Nm |
| Torque RPM | 1500 RPM | 2800 RPM |
| Engine Bore Size | 69.6 mm | 98 mm |
| Engine Stroke Size | 82 mm | 90.5 mm |
| Top Speed | 160 km/hour | 250 km/hour |
| Acceleration 0-100mph | 13 seconds | 5.4 seconds |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 5 doors | 2 doors |
| Vehicle Weight | 861 kg | 1995 kg |
| Vehicle Length | 3540 mm | 5070 mm |
| Vehicle Width | 1580 mm | 1880 mm |
| Vehicle Height | 1550 mm | 1420 mm |
| Wheelbase Size | 2350 mm | 2960 mm |
| Fuel Consumption | 3.9 L/100km | 9.8 L/100km |
| Fuel Consumption City | 5.6 L/100km | 14.7 L/100km |
| Fuel Consumption Overall | 4.5 L/100km | 12.1 L/100km |
| Fuel Tank Capacity | 35 L | 90 L |
