2003 Fiat Siena vs. 1980 Mercedes-Benz 500
To start off, 2003 Fiat Siena is newer by 23 year(s). Which means there will be less support and parts availability for 1980 Mercedes-Benz 500. In addition, the cost of maintenance, including insurance, on 1980 Mercedes-Benz 500 would be higher. At 4,972 cc (8 cylinders), 1980 Mercedes-Benz 500 is equipped with a bigger engine. In terms of performance, 1980 Mercedes-Benz 500 (237 HP @ 5000 RPM) has 167 more horse power than 2003 Fiat Siena. (70 HP @ 5750 RPM) In normal driving conditions, 1980 Mercedes-Benz 500 should accelerate faster than 2003 Fiat Siena. With that said, vehicle weight also plays an important factor in acceleration. 1980 Mercedes-Benz 500 weights approximately 495 kg more than 2003 Fiat Siena. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Mercedes-Benz 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Mercedes-Benz 500. However, in wet, icy, snow, or gravel driving conditions, 2003 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Mercedes-Benz 500 (402 Nm @ 3200 RPM) has 307 more torque (in Nm) than 2003 Fiat Siena. (95 Nm @ 4000 RPM). This means 1980 Mercedes-Benz 500 will have an easier job in driving up hills or pulling heavy equipment than 2003 Fiat Siena. 1980 Mercedes-Benz 500 has automatic transmission and 2003 Fiat Siena has manual transmission. 2003 Fiat Siena will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Mercedes-Benz 500 will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Fiat Siena | 1980 Mercedes-Benz 500 | |
Make | Fiat | Mercedes-Benz |
Model | Siena | 500 |
Year Released | 2003 | 1980 |
Engine Position | Front | Front |
Engine Size | 999 cc | 4972 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 70 HP | 237 HP |
Engine RPM | 5750 RPM | 5000 RPM |
Torque | 95 Nm | 402 Nm |
Torque RPM | 4000 RPM | 3200 RPM |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1020 kg | 1515 kg |
Vehicle Length | 4110 mm | 4760 mm |
Vehicle Width | 1630 mm | 1800 mm |
Vehicle Height | 1470 mm | 1340 mm |
Wheelbase Size | 2380 mm | 2820 mm |