2003 Ford Crown Victoria vs. 1967 Lancia Fulvia
To start off, 2003 Ford Crown Victoria is newer by 36 year(s). Which means there will be less support and parts availability for 1967 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1967 Lancia Fulvia would be higher. At 4,601 cc (8 cylinders), 2003 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2003 Ford Crown Victoria (221 HP @ 4800 RPM) has 121 more horse power than 1967 Lancia Fulvia. (100 HP @ 6000 RPM). In normal driving conditions, 2003 Ford Crown Victoria should accelerate faster than 1967 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2003 Ford Crown Victoria weights approximately 807 kg more than 1967 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2003 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1967 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Ford Crown Victoria (361 Nm @ 4000 RPM) has 241 more torque (in Nm) than 1967 Lancia Fulvia. (120 Nm @ 5000 RPM). This means 2003 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1967 Lancia Fulvia. 2003 Ford Crown Victoria has automatic transmission and 1967 Lancia Fulvia has manual transmission. 1967 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2003 Ford Crown Victoria | 1967 Lancia Fulvia | |
| Make | Ford | Lancia |
| Model | Crown Victoria | Fulvia |
| Year Released | 2003 | 1967 |
| Body Type | Sedan | Coupe |
| Engine Position | Front | Front |
| Engine Size | 4601 cc | 1298 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 221 HP | 100 HP |
| Engine RPM | 4800 RPM | 6000 RPM |
| Torque | 361 Nm | 120 Nm |
| Torque RPM | 4000 RPM | 5000 RPM |
| Engine Bore Size | 90.2 mm | 70.8 mm |
| Engine Stroke Size | 90 mm | 78.8 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1777 kg | 970 kg |
| Vehicle Length | 5390 mm | 3990 mm |
| Vehicle Width | 1990 mm | 1570 mm |
| Vehicle Height | 1450 mm | 1330 mm |
| Wheelbase Size | 2620 mm | 2340 mm |
| Fuel Consumption Overall | 11.8 L/100km | 6.7 L/100km |
| Fuel Tank Capacity | 75 L | 38 L |
