2003 Ford Crown Victoria vs. 1992 Honda Integra
To start off, 2003 Ford Crown Victoria is newer by 11 year(s). Which means there will be less support and parts availability for 1992 Honda Integra. In addition, the cost of maintenance, including insurance, on 1992 Honda Integra would be higher. At 4,601 cc (8 cylinders), 2003 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2003 Ford Crown Victoria (221 HP @ 4800 RPM) has 115 more horse power than 1992 Honda Integra. (106 HP @ 6300 RPM). In normal driving conditions, 2003 Ford Crown Victoria should accelerate faster than 1992 Honda Integra. With that said, vehicle weight also plays an important factor in acceleration. 2003 Ford Crown Victoria weights approximately 763 kg more than 1992 Honda Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2003 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1992 Honda Integra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Ford Crown Victoria (361 Nm @ 4000 RPM) has 227 more torque (in Nm) than 1992 Honda Integra. (134 Nm @ 4500 RPM). This means 2003 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1992 Honda Integra. 2003 Ford Crown Victoria has automatic transmission and 1992 Honda Integra has manual transmission. 1992 Honda Integra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Ford Crown Victoria | 1992 Honda Integra | |
Make | Ford | Honda |
Model | Crown Victoria | Integra |
Year Released | 2003 | 1992 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 4601 cc | 1590 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 221 HP | 106 HP |
Engine RPM | 4800 RPM | 6300 RPM |
Torque | 361 Nm | 134 Nm |
Torque RPM | 4000 RPM | 4500 RPM |
Engine Bore Size | 90.2 mm | 81 mm |
Engine Stroke Size | 90 mm | 77.4 mm |
Engine Compression Ratio | 9.4:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1777 kg | 1014 kg |
Vehicle Length | 5390 mm | 4400 mm |
Vehicle Width | 1990 mm | 1700 mm |
Vehicle Height | 1450 mm | 1330 mm |
Wheelbase Size | 2620 mm | 2560 mm |