2003 GAZ 3111 vs. 1980 Mitsubishi Sigma

To start off, 2003 GAZ 3111 is newer by 23 year(s). Which means there will be less support and parts availability for 1980 Mitsubishi Sigma. In addition, the cost of maintenance, including insurance, on 1980 Mitsubishi Sigma would be higher. At 2,285 cc (4 cylinders), 2003 GAZ 3111 is equipped with a bigger engine. In terms of performance, 2003 GAZ 3111 (148 HP @ 5200 RPM) has 62 more horse power than 1980 Mitsubishi Sigma. (86 HP @ 5200 RPM). In normal driving conditions, 2003 GAZ 3111 should accelerate faster than 1980 Mitsubishi Sigma. With that said, vehicle weight also plays an important factor in acceleration. 2003 GAZ 3111 weights approximately 470 kg more than 1980 Mitsubishi Sigma. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 GAZ 3111 (215 Nm @ 4000 RPM) has 70 more torque (in Nm) than 1980 Mitsubishi Sigma. (145 Nm @ 2400 RPM). This means 2003 GAZ 3111 will have an easier job in driving up hills or pulling heavy equipment than 1980 Mitsubishi Sigma.

Compare all specifications:

2003 GAZ 3111 1980 Mitsubishi Sigma
Make GAZ Mitsubishi
Model 3111 Sigma
Year Released 2003 1980
Engine Position Front Front
Engine Size 2285 cc 1995 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 148 HP 86 HP
Engine RPM 5200 RPM 5200 RPM
Torque 215 Nm 145 Nm
Torque RPM 4000 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1500 kg 1030 kg
Vehicle Length 4950 mm 4460 mm
Vehicle Width 1810 mm 1660 mm
Vehicle Height 1490 mm 1370 mm
Wheelbase Size 2810 mm 2520 mm