2003 Holden Statesman vs. 1996 Seat Toledo
To start off, 2003 Holden Statesman is newer by 7 year(s). Which means there will be less support and parts availability for 1996 Seat Toledo. In addition, the cost of maintenance, including insurance, on 1996 Seat Toledo would be higher. At 5,667 cc (8 cylinders), 2003 Holden Statesman is equipped with a bigger engine. In terms of performance, 2003 Holden Statesman (316 HP @ 5200 RPM) has 253 more horse power than 1996 Seat Toledo. (63 HP @ 4400 RPM). In normal driving conditions, 2003 Holden Statesman should accelerate faster than 1996 Seat Toledo. With that said, vehicle weight also plays an important factor in acceleration. 2003 Holden Statesman weights approximately 718 kg more than 1996 Seat Toledo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2003 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1996 Seat Toledo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Holden Statesman (461 Nm @ 4000 RPM) has 334 more torque (in Nm) than 1996 Seat Toledo. (127 Nm @ 2200 RPM). This means 2003 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1996 Seat Toledo. 2003 Holden Statesman has automatic transmission and 1996 Seat Toledo has manual transmission. 1996 Seat Toledo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
2003 Holden Statesman | 1996 Seat Toledo | |
Make | Holden | Seat |
Model | Statesman | Toledo |
Year Released | 2003 | 1996 |
Engine Position | Front | Front |
Engine Size | 5667 cc | 1896 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 316 HP | 63 HP |
Engine RPM | 5200 RPM | 4400 RPM |
Torque | 461 Nm | 127 Nm |
Torque RPM | 4000 RPM | 2200 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1750 kg | 1032 kg |
Vehicle Length | 5200 mm | 4330 mm |
Vehicle Width | 1850 mm | 1670 mm |
Vehicle Height | 1450 mm | 1430 mm |
Wheelbase Size | 2950 mm | 2480 mm |