2003 Mazda 6 vs. 1990 Mercedes-Benz 300

To start off, 2003 Mazda 6 is newer by 13 year(s). Which means there will be less support and parts availability for 1990 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1990 Mercedes-Benz 300 would be higher. At 2,962 cc (6 cylinders), 1990 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1990 Mercedes-Benz 300 (188 HP @ 5700 RPM) has 44 more horse power than 2003 Mazda 6. (144 HP @ 3500 RPM) In normal driving conditions, 1990 Mercedes-Benz 300 should accelerate faster than 2003 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 1990 Mercedes-Benz 300 weights approximately 35 kg more than 2003 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1990 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2003 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Mazda 6 (310 Nm @ 2000 RPM) has 50 more torque (in Nm) than 1990 Mercedes-Benz 300. (260 Nm @ 4800 RPM). This means 2003 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 1990 Mercedes-Benz 300. 1990 Mercedes-Benz 300 has automatic transmission and 2003 Mazda 6 has manual transmission. 2003 Mazda 6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2003 Mazda 6 1990 Mercedes-Benz 300
Make Mazda Mercedes-Benz
Model 6 300
Year Released 2003 1990
Engine Position Front Front
Engine Size 1998 cc 2962 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 144 HP 188 HP
Engine RPM 3500 RPM 5700 RPM
Torque 310 Nm 260 Nm
Torque RPM 2000 RPM 4800 RPM
Engine Bore Size 86 mm 88.5 mm
Engine Stroke Size 86 mm 80.3 mm
Engine Compression Ratio 18.0:1 10.0:1
Top Speed 200 km/hour 211 km/hour
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1485 kg 1520 kg
Vehicle Length 4680 mm 5030 mm
Vehicle Width 1790 mm 1830 mm
Vehicle Height 1440 mm 1440 mm
Wheelbase Size 2680 mm 2940 mm