2003 Mercedes-Benz CL vs. 2010 Nissan NP300
To start off, 2010 Nissan NP300 is newer by 7 year(s). Which means there will be less support and parts availability for 2003 Mercedes-Benz CL. In addition, the cost of maintenance, including insurance, on 2003 Mercedes-Benz CL would be higher. At 5,980 cc (12 cylinders), 2003 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2003 Mercedes-Benz CL (603 HP @ 4800 RPM) has 462 more horse power than 2010 Nissan NP300. (141 HP @ 5600 RPM). In normal driving conditions, 2003 Mercedes-Benz CL should accelerate faster than 2010 Nissan NP300. With that said, vehicle weight also plays an important factor in acceleration. 2003 Mercedes-Benz CL weights approximately 826 kg more than 2010 Nissan NP300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2003 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 2010 Nissan NP300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Mercedes-Benz CL (1,000 Nm @ 2000 RPM) has 795 more torque (in Nm) than 2010 Nissan NP300. (205 Nm @ 3600 RPM). This means 2003 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2010 Nissan NP300. 2003 Mercedes-Benz CL has automatic transmission and 2010 Nissan NP300 has manual transmission. 2010 Nissan NP300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Mercedes-Benz CL will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2003 Mercedes-Benz CL | 2010 Nissan NP300 | |
| Make | Mercedes-Benz | Nissan |
| Model | CL | NP300 |
| Year Released | 2003 | 2010 |
| Body Type | Coupe | Pickup |
| Engine Position | Front | Front |
| Engine Size | 5980 cc | 2389 cc |
| Engine Cylinders | 12 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 603 HP | 141 HP |
| Engine RPM | 4800 RPM | 5600 RPM |
| Torque | 1000 Nm | 205 Nm |
| Torque RPM | 2000 RPM | 3600 RPM |
| Engine Compression Ratio | 9.0:1 | 9.2:1 |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 4 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 2155 kg | 1329 kg |
| Vehicle Length | 5000 mm | 5180 mm |
| Vehicle Width | 1860 mm | 1830 mm |
| Vehicle Height | 1400 mm | 1730 mm |
| Wheelbase Size | 2860 mm | 2960 mm |
| Fuel Tank Capacity | 88 L | 75 L |
