2004 Audi S4 vs. 1997 Beijing BJ 2020

To start off, 2004 Audi S4 is newer by 7 year(s). Which means there will be less support and parts availability for 1997 Beijing BJ 2020. In addition, the cost of maintenance, including insurance, on 1997 Beijing BJ 2020 would be higher. At 4,172 cc (8 cylinders), 2004 Audi S4 is equipped with a bigger engine. In terms of performance, 2004 Audi S4 (339 HP @ 7000 RPM) has 256 more horse power than 1997 Beijing BJ 2020. (83 HP @ 3800 RPM). In normal driving conditions, 2004 Audi S4 should accelerate faster than 1997 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 2004 Audi S4 weights approximately 166 kg more than 1997 Beijing BJ 2020. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 Audi S4 (410 Nm @ 3500 RPM) has 237 more torque (in Nm) than 1997 Beijing BJ 2020. (173 Nm @ 2200 RPM). This means 2004 Audi S4 will have an easier job in driving up hills or pulling heavy equipment than 1997 Beijing BJ 2020.

Compare all specifications:

2004 Audi S4 1997 Beijing BJ 2020
Make Audi Beijing
Model S4 BJ 2020
Year Released 2004 1997
Engine Size 4172 cc 2445 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 339 HP 83 HP
Engine RPM 7000 RPM 3800 RPM
Torque 410 Nm 173 Nm
Torque RPM 3500 RPM 2200 RPM
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 1720 kg 1554 kg
Vehicle Length 4590 mm 3870 mm
Vehicle Width 1780 mm 1760 mm
Vehicle Height 1430 mm 1880 mm
Wheelbase Size 2470 mm 2310 mm