2004 Avanti Studebaker vs. 1980 BMW 628
To start off, 2004 Avanti Studebaker is newer by 24 year(s). Which means there will be less support and parts availability for 1980 BMW 628. In addition, the cost of maintenance, including insurance, on 1980 BMW 628 would be higher. At 6,750 cc (10 cylinders), 2004 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2004 Avanti Studebaker (306 HP @ 4250 RPM) has 125 more horse power than 1980 BMW 628. (181 HP @ 5800 RPM). In normal driving conditions, 2004 Avanti Studebaker should accelerate faster than 1980 BMW 628. With that said, vehicle weight also plays an important factor in acceleration. 2004 Avanti Studebaker weights approximately 1315 kg more than 1980 BMW 628. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2004 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1980 BMW 628. In wet, icy, snow, or gravel driving conditions, 2004 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 Avanti Studebaker (425 Nm @ 3250 RPM) has 185 more torque (in Nm) than 1980 BMW 628. (240 Nm @ 4200 RPM). This means 2004 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1980 BMW 628. 2004 Avanti Studebaker has automatic transmission and 1980 BMW 628 has manual transmission. 1980 BMW 628 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2004 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
2004 Avanti Studebaker | 1980 BMW 628 | |
Make | Avanti | BMW |
Model | Studebaker | 628 |
Year Released | 2004 | 1980 |
Engine Position | Front | Front |
Engine Size | 6750 cc | 2786 cc |
Engine Cylinders | 10 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 306 HP | 181 HP |
Engine RPM | 4250 RPM | 5800 RPM |
Torque | 425 Nm | 240 Nm |
Torque RPM | 3250 RPM | 4200 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2775 kg | 1460 kg |
Vehicle Length | 5490 mm | 4760 mm |
Vehicle Width | 2040 mm | 1730 mm |
Vehicle Height | 2040 mm | 1370 mm |
Wheelbase Size | 3410 mm | 2640 mm |