2004 Chrysler 300 vs. 2010 Fiat Bravo

To start off, 2010 Fiat Bravo is newer by 6 year(s). Which means there will be less support and parts availability for 2004 Chrysler 300. In addition, the cost of maintenance, including insurance, on 2004 Chrysler 300 would be higher. At 6,057 cc (8 cylinders), 2004 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2004 Chrysler 300 (425 HP @ 6200 RPM) has 277 more horse power than 2010 Fiat Bravo. (148 HP @ 4000 RPM). In normal driving conditions, 2004 Chrysler 300 should accelerate faster than 2010 Fiat Bravo. With that said, vehicle weight also plays an important factor in acceleration. 2004 Chrysler 300 weights approximately 453 kg more than 2010 Fiat Bravo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2004 Chrysler 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2004 Chrysler 300. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Bravo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 Chrysler 300 (569 Nm @ 4800 RPM) has 264 more torque (in Nm) than 2010 Fiat Bravo. (305 Nm @ 2000 RPM). This means 2004 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Bravo. 2004 Chrysler 300 has automatic transmission and 2010 Fiat Bravo has manual transmission. 2010 Fiat Bravo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2004 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2004 Chrysler 300 2010 Fiat Bravo
Make Chrysler Fiat
Model 300 Bravo
Year Released 2004 2010
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 6057 cc 1908 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 425 HP 148 HP
Engine RPM 6200 RPM 4000 RPM
Torque 569 Nm 305 Nm
Torque RPM 4800 RPM 2000 RPM
Engine Bore Size 103 mm 82 mm
Engine Stroke Size 90.9 mm 90.4 mm
Engine Compression Ratio 10.3:1 17.5:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1888 kg 1435 kg
Vehicle Length 5010 mm 4340 mm
Vehicle Width 1890 mm 1800 mm
Vehicle Height 1480 mm 1500 mm
Wheelbase Size 3050 mm 2610 mm
Fuel Tank Capacity 72 L 58 L