2004 Ford Econoline vs. 1957 Ford Prefect

To start off, 2004 Ford Econoline is newer by 47 year(s). Which means there will be less support and parts availability for 1957 Ford Prefect. In addition, the cost of maintenance, including insurance, on 1957 Ford Prefect would be higher. At 4,195 cc (6 cylinders), 2004 Ford Econoline is equipped with a bigger engine. In terms of performance, 2004 Ford Econoline (197 HP @ 4700 RPM) has 166 more horse power than 1957 Ford Prefect. (31 HP @ 4500 RPM). In normal driving conditions, 2004 Ford Econoline should accelerate faster than 1957 Ford Prefect. With that said, vehicle weight also plays an important factor in acceleration. 2004 Ford Econoline weights approximately 1560 kg more than 1957 Ford Prefect. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 Ford Econoline (338 Nm @ 2700 RPM) has 267 more torque (in Nm) than 1957 Ford Prefect. (71 Nm @ 2150 RPM). This means 2004 Ford Econoline will have an easier job in driving up hills or pulling heavy equipment than 1957 Ford Prefect.

Compare all specifications:

2004 Ford Econoline 1957 Ford Prefect
Make Ford Ford
Model Econoline Prefect
Year Released 2004 1957
Engine Position Front Front
Engine Size 4195 cc 1172 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 197 HP 31 HP
Engine RPM 4700 RPM 4500 RPM
Torque 338 Nm 71 Nm
Torque RPM 2700 RPM 2150 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 2325 kg 765 kg
Vehicle Length 5390 mm 3850 mm
Vehicle Width 2020 mm 1550 mm
Vehicle Height 2060 mm 1500 mm
Wheelbase Size 3510 mm 2220 mm